BW Compact 2 Part Industrial Gland
 
    APPLICATION  
   Single wire armoured cable types.   
   Dry Indoors
   APPLICABLE STANDARD
   BS 6121.
   FITTING INSTRUCTIONS
  1. Seperate gland into its two component       parts and pass item 2 over the cable.
  2. Strip back outer sheath and armour to       suit equipment geometry.
  3. Expose armouring by further stripping       outer sheath for a length equivalent to       the item 1 knurl plus 5mm.
  4. Secure Item 1 into the equipment.
  5. Pass cable through item 1, equally       spacing armoured wires on knurled       cone.
  6. Lock armouring by tightening item 2
      onto item 1.
      Note: Item 1 and Item 2 should not lock       face to face.


See dimensions table below
Gland
Size
Entry Thread
Dia.        Min
      'C'     Length  'D'
Bore
Dia.
'A'
Bore
Dia.
'B'
Armor
Wire
Dia.
Length
'E'
Envelope
Dia.
'F'
Shroud
Ref.
20S
20
10
11.7
16.0
0.9/1.25
17.5
24.5
223
20
20
10
14.0
21.1
0.9/1.25
19.5
31.0
225
25
25
10
20.0
27.5
1.25/1.60
20.5
37.0
175
32
32
10
26.3
34.5
1.60/2.00
20.5
45.5
227
40
40
15
32.2
43.0
1.60/2.00
25.5
56.5
228
50S
50
15
38.2
50.2
2.00/2.50
25.7
63.5
229
50
50
15
44.1
55.8
2.00/2.50
24.9
72.5
230
63
63
15
56.0
68.3
2.50
34.9
89.0
233
75S
75
15
62.0
76.3
2.50
41.3
100.0
176
75
75
15
68.0
83.0
2.50
43.3
105.5
177


All Dimensions in millimetres